Holybro Pixhawk Jetson Baseboard Only (Aluminum Case) 11072A

Holybro Pixhawk Jetson Baseboard Only (Aluminum Case) 11072A

Shop

Holybro Pixhawk Jetson Baseboard Only (Aluminum Case) 11072A bei Premium-Modellbau kaufen

Technische Daten

Eigenschaft	Wert
Hersteller	Holybro
Hersteller-Artikelnummer	11072A
PM Artikelnummer	PM-7016

Holybro Jetson Baseboard für Pixhawk 6X / 6X Pro - 11072A (mit Metallgehäuse)

**Es handelt sich um das reine Baseboard ohne jegliche weitere Hardware. **Zum Betrieb wird noch ein Pixhawk 6X Flightcontroller sowie ein Jetson Orin und weiteres Zubehör (BEC, SSD, ...) benötigt. **Das Set ist z.B. als Upgrade von bisherigen Baseboards oder zur Nutzung eines bereits vorhandenen Orin vorgesehen. Passende GPS Module finden Sie in unseren anderen Angeboten (z.B. Holybro M9N, M10, Holybro F9P, uvm.).

Lieferumfang

Holybro Jetson Baseboard für Pixhawk 6X - 11072A (Version mit Metallgehäuse)

Ausführliche Informationen und Technische Daten:

Description

The Holybro Pixhawk Jetson Baseboard is based on the Pixhawk Autopilot Bus open source specification and the NVIDIA Jetson Orin NX/Nano Carrier Board. The Pixhawk Autopilot Bus (PAB) Form Factor enables this to be used with any PAB flight controller such as the Pixhawk 6X

## Baseboard Port & Connection

**Jetson Connectors - 2x Gigabit Ethernet port

	Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)

	- 8-pin JST-GH

	- RJ45



- 2x MIPI CSI Camera Inputs

	4 Lanes each

	- 15-Pin Raspberry Pi Cam FFC



- 2x USB 3.0 Host Port

	USB A

	- 5A Current Limit



- 2x USB 2.0 Host Port

	5-Pin JST-GH

	- 0A Current Limit



- USB 2.0 for Programming/debugging

	USB-C



- 2 Key M 2242 for NVMe SSD

	PCIEx4



- 2 Key E 2230 for WiFi/BT

	PCIEx2

	- USB

	- UART

	- I2S



- Mini HDMI Out

- 4x GPIO

	6-pin JST-GH



- CAN Port

	Connected to Autopilot’s CAN2 (4 Pin JST-GH)



- SPI Port

	7-Pin JST-GH



- I2C Port

	4-Pin JST-GH



- I2S Port

	7-Pin JST-GH



- 2x UART Port

	1 for debug

	- 1 connected to Autopilot’s telem2



- Fan Power Port

- IIM42652 IMU

- Input Power

	XT30 Connector

	- Voltage Rating: 7V-24V (3S-4S)

	- Separate input power circuits than the Autopilot to ensure flight safety

	- Holybro UBEC can be used for application above 4S

	- **Note:** The Pixhawk Jetson Baseboard has an integrated UBEC to convert 7V-24V to 5.5V for the Jetson. Using an external UBEC alongside the integrated one provides redundancy and easier replacement in case of BEC failure.



- Power Requirements

	8V/3A Minimum

	- Depends on Usage and Peripherals

**Autopilot Connectors - Pixhawk Autopilot Bus Interface

	100 Pin Hirose DF40

	- 50 Pin Hirose DF40



- Redundant Digital Power Module Inputs

	I2C Power Monitor Support

	- 2x – 6 Pin Molex CLIK-Mate

	- Power Path Selector w/ Overvoltage Protection



- Voltage Ratings:

	Max input voltage: 6V

	- USB Power Input: 4.75~5.25V



- Full GPS Plus Safety Switch Port

	10-Pin JST-GH



- Secondary (GPS2) Port

	6-pin JST-GH



- 2x CAN Ports

	4 Pin JST-GH



- 3x Telemetry Ports with Flow Control

	2x 6-Pin JST-GH

	- 1 is connected to Jetson’s UART1 Port



- 16 PWM Outputs

	2x 10-Pin JST-GH



- UART4 & I2C Port

	6-Pin JST-GH



- 2x Gigabit Ethernet port

	Connected to both Jetson & Autopilot via Ethernet switch (RTL8367S)

	- 8-pin JST-GH

	- RJ45



- AD & IO

	8-Pin JST-GH



- USB 2.0

	USB-C

	- 4-pin JST-GH



- DSM Input

	3-pin JST-ZH 1.5mm Pitch



- RC in

	PPM/SBUS

	- 5-pin JST-GH



- SPI Port

	External Sensor Bus (SPI5

	- 11-Pin JST-GH



- 2x Debug Port

	1 for FMU

	- 1 for IO

	- 10-Pin JST-SH



- Dimensions (Without Jetson and Flight Controller Module)

	126x80x38mm



- Weight

	With Jetson, Heatsink, Flight Controller, M.2 SSD, M.2 Wi-Fi Module 203.2g