Holybro Pixhawk 6X Standard Set v2A 20300
Holybro Pixhawk 6X Standard Set v2A 20300
Shop
Holybro Pixhawk 6X Standard Set v2A 20300 bei Premium-Modellbau kaufen
Technische Daten
Hersteller
Holybro
Hersteller-Artikelnummer
20300
PM Artikelnummer
PM-7019
Key Design Points
Redundancy: 3x ICM-45686 IMU sensors (±32g) with BalancedGyro™ technology & 2x Barometer sensors
High performance STM32H753 Processor with a clock speed of up to 480 MHz
Modular flight controller: separated IMU, FMU, and Base system connected by a 100-pin & a 50-pin Pixhawk® Autopilot Bus connector.
Triple redundancy domains: Completely isolated sensor domains with separate buses and separate power control
All New advanced durable vibration isolation material with resonance frequency in the higher spectrum
Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
Temperature-controlled IMU board, allowing the optimum working temperature of IMUs
Hardware switchable 3.3V or 5V signal mode (requires baseboard modification)
Digital power module support for better voltage and current data accuracy
All new Vibration Isolation Design
This new vibration isolation design uses the same custom-formulated durable isolation material as the Pixhawk 6X Pro, instead of the traditional foam design. Backed by extensive R&D and testing, it offers optimal IMU damping characteristics with a resonance frequency in the higher spectrum, perfect for industrial and commercial drone
Note:
The Rev 8 Version is supported in the PX4 1.14.3 release or later, as well as the Ardupilot 4.5.0 stable release or later. It ships with PX4 firmware by default. User can also use Ardupilot firmware by flashing the firmware via Mission Planner or QGroundControl.
Specification
Processors & Sensors
FMU Processor: STM32H753
32 Bit Arm® Cortex®-M7, 480MHz, 2MB flash memory, 1MB RAM
IO Processor: STM32F103
32 Bit Arm® Cortex®-M3, 72MHz, 64KB SRAM
On-board sensors (Shipping Currently, Rev8)
Accel/Gyro: 3x ICM-45686 (with BalancedGyro™ Technology)
Barometer: ICP20100 & BMP388
Mag: BMM150
On-board sensors (Previous Revision, Rev 3/4)
Accel/Gyro: BMI088/ICM-20649
Accel/Gyro: ICM-42688-P
Accel/Gyro: ICM-42670-P
Mag: BMM150
Barometer: 2x BMP388
Electrical data
Voltage Ratings:
Max input voltage: 6V
USB Power Input: 4.75~5.25V
Servo Rail Input: 0~36V
Current Ratings:
Telem1 output current limiter: 1.5A
All other port combined output current limiter: 1.5A
PWM Signal Voltage:
Default 3.3V (Adjustable to 5V with a change onboard resistor)
Operating Temperature: -25-85°C
Mechanical data
Dimensions
Flight Controller Module: 38.8 x 31.8 x 16.8mm
Standard Baseboard: 52.4 x 102 x 16.7mm (Aluminum)
Mini Baseboard: 43.4 x 72.8 x 14.2 mm
Weight
Flight Controller Module: 31.3g
Standard Baseboard: 72.5g (Aluminum)
Mini Baseboard: 26.5g
Reference Links
Latest info on Supported Firmware.
For other technical information, please visit https://docs.holybro.com/.
SKU 20293/SKU 20300/SKU20313 includes:
Pixhawk 6X Flight Controller Module
Standard Baseboard v2A/v2B or Mini Baseboard
PM02D HV Power Module
Cable Set
Last updated