# Holybro Pixhawk 6X Pro Standard Set v2B 20316

## Shop

[Holybro Pixhawk 6X Pro Standard Set v2B 20316 bei Premium-Modellbau kaufen](https://www.premium-modellbau.de/search?sSearch=20316)

## Technische Daten

| Eigenschaft                  | Wert    |
| ---------------------------- | ------- |
| **Hersteller**               | Holybro |
| **Hersteller-Artikelnummer** | 20316   |
| **PM Artikelnummer**         | PM-7068 |

## Key Design Point

* High-performance ADIS16470 Industrial IMU with high accelerometer dynamic range (±40 g). perfect for accurate motion sensing in demanding UAV applications
* All New advanced durable vibration isolation material with resonance frequency in the higher spectrum. ideal for industrial and commercial drone applications
* Triple redundant IMU & double redundant barometer on separate buses
* High performance STM32H753 Processor
* Modular flight controller: separated IMU. FMU. and Base system
* Safety-driven design incorporates sensors from different manufacturers and model lineups
* Independent LDO powers every sensor with independent power control.
* Ethernet interface for high-speed mission computer integration. Transformerless can be achieved using 50 Ohm termination resistors at the target device (AN2190 50 Ohm termination).
* Temperature-controlled IMU board. allowing optimum working temperature of IMUs
* Hardware switchable 3.3V or 5V signal mode (requires base board modification)

## All new Vibration Isolation Design

This new vibration isolation design uses a custom-formulated durabile silicone-based isolation material in place of the traditional foam design. Backed by extensive R\&D and testing. it offers optimal IMU damping characteristics with resonance frequency in the higher spectrum. perfect for industrial and commercial drone

\*\*Note:

* FC Module + a baseboard is required for this product to function.  A FC Module or a Baseboard by itself will not function.

## Specification

\*\*Processors & Sensors

* FMU Processor: STM32H75332 Bit Arm® Cortex®-M7. 480MHz. 2MB flash memory. 1MB RAM
* IO Processor: STM32F10332 Bit Arm® Cortex®-M3. 72MHz. 64KB SRAM
* On-board sensorsAccel/Gyro: ADIS16470±40g. Vibration Isolated. Industrial IMU
* Accel/Gyro: IIM-42652±16g. Vibration Isolated. Industrial IMU
* Accel/Gyro: ICM-45686 with BalancedGyro„¢ Technology±32g. Hard Mounted
* Barometer: ICP20100
* Barometer: BMP388
* Mag: BMM150
* NXP EdgeLock SE050 Plug & Trust hardware secure element

\*\*Electrical data

* Voltage Ratings:
* Max input voltage: 6V
* USB Power Input: 4.75\~5.25V
* Servo Rail Input: 0\~36V
* Current Ratings:
* Telem1 output current limiter: 1.5A
* All other port combined output current limiter: 1.5A
* Operating Temperature: -25-85°C

\*\*Mechanical data

* Dimensions
* Flight Controller Module: 38.8 x 31.8 x 30.1mm
* Standard Baseboard: 52.4 x 102 x 16.7mm  (Aluminum)
* Mini Baseboard: 43.4 x 72.8 x 14.2 mm
* Weight
* Flight Controller Module: 50g
* Standard Baseboard: 72.5g  (Aluminum)
* Mini Baseboard: 26.5g

## Reference Links:

* Isolation Material Testing Data
* Power module comparison chart
* Dimensions
* PX4 & Ardupilot Guide
* Sample Wiring Diagram
* Firmware Support
* Pixhawk Baseboards Ports
* Power Module Setup Guide

## Package Includes

\*\*SKU 11070 includes:

* Pixhawk 6X Pro Flight Controller Module
* Optional IMU Damping Replacement (softer than pre-installed)

##