Programmierkarte für FR5311M

Feetech Programmieradapter Programmierkarte für FR5311M Digtal Servo

Diese Programmierkarte ermöglicht es das Feetech FR5311M Servo vom Servo-Modus in den Continuous Rotation Modus umzuschalten.

Zur Programmierung wird eine 4,8V-7,2V Spannungsquelle benötigt.

Die Karte kann auch zum Testen anderer Servomodelle genutzt werden.

Set Servo Mode

All LED at off status

• a: Selected switch to “S”side

• b: Long press the “P”key (> 5 second)

• c: all LEDs will flash when program completed

• d: Servo have set to work at Servo Mode

Test Servo

• a: Press“S”key (one time)

• b: Into auto sweep test mode, and“S” LED will quick flash

• c: Press“S”key (tow time)

• d: Into 3 point test mode, and“S” LED will slow flash

• e: Press“L”key Servo will go to the LEFT side position

• f: Press“P”key Servo will go to the MIDDLE position

• g: Press“R”key Servo will go to the RIGHT side position

• h: Press“S”key (three time)

• i: Back to program mode, and all LED will off

Set Continuous Rotation Mode

All LED at off status

• a: Selected switch to “C”side

• b: Long press the “P”key (> 5 second)

• c: all LEDs will flash when program completed

• d: Servo have set to work at Continuous Rotation Mode

• e: Test servo can stop at MIDDLE position, CCW at LEFT position and CWat RIGHT

• position