PM12S-3

Matek BEC Power Module 12S 3x BECs 5V / 12V / 5-8V einstellbar - PM12S-3 - Übersichtsseite

Link zum Premium-Modellbau Shop

Matek BEC Power Module 12S 3x BECs 5V / 12V / 5-8V einstellbar - PM12S-3Premium-Modellbau

Matek BEC Power Module 12S 3x BECs 5V / 12V / 5-8V einstellbar - PM12S-3 im Premium-Modellbau Shop

Matek BEC Power Module 12S 3x BECs 5V / 12V / 5-8V einstellbar - PM12S-3

Hochwertiges Matek Power Module mit drei separaten BECs zum Betrieb an 9-55V.

Das einstellbare BEC kann über Lötpunkte zwischen 5V und 6V und 8V umgeschaltet werden. die anderen BECs liefern 5V bzw. 12V.

Gewicht: ca. 53g

Abmessungen: 61 x 40 x 15 mm

Eingangsspannung: (9-55V)

Ausgangsspannung BEC 1: 5V (4A Dauer / 6A Peak)

Ausgangsspannung BEC 2: 12V (4A Dauer / 6A Peak)

Ausgangsspannung BEC 3: 5,25V / 6V / 8V (15A Dauer / 25A Peak)

Features

• Wide 9V to 55V Operating Input Range with TVS protection

• 3x independent Step-Down Voltage Regulators

• BEC Vx, 5.2V / 6V / 8V output options. supports typical continuous output current of up to 15A, Peak current of up to 25A.

• BEC 5V (Fixed), 4A continuous

• BEC 12V (Fixed), 4A continuous

• 1K:20K voltage divider built-in (Volt = 1/21 Input voltage)

• Current sensor signal passthrough pad

• Size & Weight: 61x40x15mm, 53g

BEC Vx

• Output voltage 5.25V / 6V / 8V options.

• Output voltage tolerance 1.5%

• Synchronous switching step-down (or buck) regulator with typical efficiencies of 90% to 96%

• Supports typical continuous output current of up to 15A, Peak current of up to 25A.

• Output ripple 32mV (VIN=50V, Output 5.25V @ 15A), 43mV (VIN=50V, Output @ 5A)

• Standby current: 10~20mA

• Reverse Input voltage protection: No

• Thermal Shutdown

• Output Short-circuit tolerant (2 seconds)

• Overcurrent protection & self-recovery

• Tip: Input voltage >= 15V is required for continuous output current of 15A

BEC 5V

• Output voltage 5.2V, tolerance 1.5%

• Supports continuous output current of up to 4A, Peak current of 6A

• Output ripple 20mV (VIN=24V, Output @ 5A), 50mV (VIN=50V, Output @ 5A)

• Reverse Input voltage protection: No

• Thermal Shutdown

• Output Short-circuit tolerant (2 seconds)

• Overcurrent protection & self-recovery

BEC 12V

• Output voltage 12V, tolerance 1.5%

• Supports continuous output current of up to 4A, Peak current of 6A

• Output ripple 18mV (VIN=24V, Output @ 5A), 32mV (VIN=50V, Output @ 5A)

• Reverse Input voltage protection: No

• Thermal Shutdown

• Output Short-circuit tolerant (2 seconds)

• Overcurrent protection & self-recovery

• Tip: Input voltage >= 13V is required for stable 12V output

Packing

• 1x PM12S-3

• 1x Low ESR capacitor ZLJ 63v 390uf

• Tips: If the input voltage is noisy, capacitor is required to be soldered to the input pads

BEC Messdaten / Übersicht

Input Volt	Input Amp	Vx output Volt	Vx output Amp	efficiency %	Ripple mV
12	2.3	5.26	5	95.3	13
12	4.69	10	93.4	19
24	1.16	5	94.5	18
24	2.34	10	93.7	20
24	3.56	15	92.3	22
50	0.57	5	92.3	23
50	1.14	10	92.3	24
50	1.73	15	91.2	32
12	2.62	6.02	5	95.7	14
12	5.35	10	93.8	15
24	1.33	5	94.3	20
24	2.67	10	93.9	20
24	4.06	15	92.7	24
50	0.65	5	92.6	24
50	1.3	10	92.6	26
50	1.97	15	91.7	33
12	3.5	8.07	5	96	53
24	1.76	5	95.5	30
24	3.54	10	95	30
24	5.37	15	93.9	30
50	0.87	5	92.8	37
50	1.72	10	93.8	40
50	2.6	15	93.1	43